Driving lessons Halifax and Surrounding area Driving Lessons Halifax

45 Stainland Road

Barkisland

Halifax

West Yorkshire

HX4 0AQ

Call Us:

01422 230 579

Driving Test Success Driving Test Success for all your theory studying
Driver And Vehicle Standards Agency Driver And Vehicle Standards Agency
Driving Instructor Association Driving Instructors Association
follow us on google plus Follow us on Google +
Advice on the show me tell me questions for driving lessons halifax
Advice on the show me tell me questions for driving lessons halifax
Driving Lessons Halifax
Driving Lessons Halifax

Driving Lessons Halifax - Show And Tell Me Questions

Here you will find help with

the show me tell part of the driving test

About the questions

You’ll be asked 2 vehicle safety questions. These are also known as the ‘show me, tell me’ questions.

The examiner will ask you one ‘show me’ question, where you’ll have to show them how you’d carry out a vehicle safety check.

You’ll also be asked one ‘tell me’ question, where you’ll have to explain to the examiner how you’d carry out the check.

 

QUESTIONS

 

Show me how you Question

 

 Would check that the direction indicators are working.

Applying the indicators or hazard warning switch and check functioning of all indicators. (May need to switch ignition on, prompt not to start engine).

 

 1. Would check the brake lights are working

 on this car, (If you need to switch the

 Ignition on, please don’t start the engine).

Operate brake pedal, make use of reflections in windows, garage doors, etc., or ask someone to help, (may need to switch ignition on, prompt not to start engine).

2. Or explain how you would check that

 the power assisted steering

 is working before starting a journey.

If the steering becomes heavy the system may not be working properly. Before starting a journey two simple checks can be made. Gentle pressure on the steering wheel, maintained while the engine is started, should result in a slight but noticeable movement as the system begins to operate. Alternatively turning the steering wheel just after moving off will give an immediate indication that the power assistance is functioning.

3. Would check the parking brake (handbrake)

for excessive wear; make

 sure you keep safe control of the vehicle.

Apply footbrake firmly. Demonstrate by applying parking brake (handbrake) so that when it is fully applied it secures itself, and is not at the end of the working travel.

 

4. Would check that the horn is working.

Check is carried out by using control (turn on ignition if necessary).

 

5. Would clean the windscreen

using the windscreen washer and wipers.

Operate control to wash and wipe windscreen (turn ignition on if necessary).

 

6. Would switch on the rear fog light(s)

 and explain when you would use it/them,

(No need to exit vehicle).

Operate switch (turn on dipped headlights and ignition if necessary). Check warning light is on. Explain use.

 

7. Switch your headlight from dipped

 to main beam and explains how

you would know the main beam is on.

Operate switch (with ignition or engine on if necessary), check with main beam warning light.

8. Would set the demister

 controls to clear all the windows effectively.

Set all relevant controls including fan, temperature air direction / source and heated screen to clear windscreen and windows. Engine does not have to be started for this demonstration.

Under The Bonnet Questions

 

 1.Identify where you would check the engine oil level

 and tell me how you would check that

 the engine has sufficient oil.

Identify dipstick / oil level indicator, describe check of oil level against the minimum / maximum markers.

 

2.Identify where you would check the engine coolant level

and tell me how you would check that the engine

 has the correct level.

Identify high/low level markings on header tank where fitted or radiator filler cap, and describe how to top up to correct level.

3. Identify where the brake fluid reservoir

 is and tell me how you would check

that you have a safe level of hydraulic brake fluid.

Identify reservoir, check level against high/low markings.

 

 

Tell me how you Questions

 

 1. Would check that the brakes are working before starting a journey.

Brakes should not feel spongy or slack. Brakes should be tested as you set off. Vehicle should not pull to one side.

 

2 The windscreen washer reservoir is

and tell me how you would

check the windscreen washer level.

Identify reservoir and explain how to check level.

 

3. Would find the information for the

 recommended tyre pressures for this car

 and how tyre pressures should be checked.

Manufacturer’s guide, use a reliable pressure gauge, check and adjust pressures when tyres are cold, don’t forget spare tyre, remember to refit valve caps.

 

4. Make sure your head restraint is

correctly adjusted so it provides

the best protection in the event of a crash.

The head restraint should be adjusted so the rigid part of the head restraint is at least as high as the eye or top of the ears, and as close to the back of the head as is comfortable. Note: Some restraints might not be adjustable.

 

5. Would check the tyres to ensure that they

have sufficient tread depth and that their

general condition is safe to use on the road.

No cuts and bulges, 1.6mm of tread depth across the central 3/4 of the breadth of the tyre and around the entire outer circumference.

 

6. Would check that the headlights

 and tail lights are working (no need to exit vehicle).

Operate switch (turn on ignition if necessary), then walk round vehicle. As this is a ‘tell me’ question, there is no need to physically check the lights.

7. Would know if there was a problem with

your anti lock braking system.

Warning light should illuminate if there is a fault with the anti lock braking system.

Driving lessons Halifax -  Show Me Tell Me Questions

Print Print | Sitemap Recommend this page Recommend this page
RPT Driver Training, 45 Stainland Road, Barkisland, Halifax, HX4 0AQ, 01422 230579, © rptdrivertraining

Call

E-mail

Directions